![](\"https:\/\/skipala.cz\/wp-content\/uploads\/2022\/09\/obr_1502KOW_v1_n.png\" "\\"obr_1502KOW_v1_n\\"")
<\/span><\/div><\/div><\/div>DIGR-1502\/E KOW<\/h2><\/div><\/div><\/div>Digital controller with continuously adjustable frequency, increased load power up to 1800VA<\/strong><\/p>\nThe DIGR-1502\/E KOW is identical to the DIGR-1502\/E model, it differs only in a larger cooler and the ability to connect a larger load of up to 1800VA. The regulator allows a smooth change of amplitude and frequency. It is mainly intended for the regulation of large bowl vibratory feeders.<\/p>\n
Parameter setting is performed directly on the control panel of the unit. The control unit can work independently or can be controlled from a PLC. The control unit enables the connection of sensors and valves to digital\/analog inputs\/outputs and ensures their function according to settings.<\/p>\n
The advantage of the DIGR-1502\/E KOW controller is the possibility of setting the own resonance frequency of a specific feeder, during which there is a sharp increase in the vibration intensity. In this way, excellent feeding results can be achieved even for components with a complicated shape or surface. The indisputable advantage of the regulator is the saving of electricity consumption compared to the triac regulator.<\/p>\n
The regulator allows a smooth change of frequency in the range of 20-120Hz with a step of 0.2Hz.<\/p>\n
The regulator has IP54 protection and can be mounted outside the switchboard.<\/p>\n
The controller includes a safely separated 24V \/ 4VA DC source for powering sensors and valves, and a 10V DC source for powering the analog input.<\/p>\n
The VSD01<\/a> vibration sensor can be connected to the DIGR-1502\/E controller.<\/p>\n<\/div>Price:<\/h2><\/div>\u20ac 883<\/strong>
\nprice from 5 pcs (5% discount): \u20ac 838,85
\nprice from 10 pcs (8% discount): \u20ac 812,36<\/p>\nPrices do not include VAT. Price of transport is by country of destination.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
Commonly used controller functions:<\/h2><\/div>- <\/i><\/span>Connection of large bowl feeders with load power up to 1800VA<\/div><\/li>
- <\/i><\/span>Possibility of connecting a vibration sensor for a constant feeding speed (automatic power regulation)<\/div><\/li>
- <\/i><\/span>Output frequency setting 20-120Hz (step 0.2Hz)<\/div><\/li>
- <\/i><\/span>Output power setting 5-100% (0.5% step)<\/div><\/li>
- <\/i><\/span>Acceleration\/deceleration time (smooth acceleration\/deceleration)<\/div><\/li>
- <\/i><\/span>Stop when the output magazine is full<\/div><\/li>
- <\/i><\/span>Empty magazine detection<\/div><\/li>
- <\/i><\/span>Detection of jammed parts in the magazine<\/div><\/li>
- <\/i><\/span>Control of the replenishment of parts from the pre-stock feeder<\/div><\/li>
- <\/i><\/span>Pneumatic separator control<\/div><\/li>
- <\/i><\/span>Ejector control of misoriented pieces<\/div><\/li>
- <\/i><\/span>Air supply control<\/div><\/li>
- <\/i><\/span>Switching between two set amplitude values using a digital input. This function can be used if you need to reduce the speed of the feeder during operation. E.g. when pouring material onto the scale as you approach the required weight.<\/div><\/li>
- <\/i><\/span>Connection of several controllers in a cascade, for example to control the assembly of linear feeder \/ bowl feeder \/ pre-stock feeder<\/div><\/li>
- <\/i><\/span>Interconnection with PLC: start\/stop, output power control (0-10V signal), power switching, input\/output monitor<\/div><\/li>
- <\/i><\/span>Parameters lock<\/div><\/li>
- <\/i><\/span>Language selection<\/div><\/li><\/ul><\/div><\/div>
Technical parameters:<\/h2><\/div>\n\n
Digital controller with continuously adjustable frequency, increased load power up to 1800VA<\/strong><\/p>\n The DIGR-1502\/E KOW is identical to the DIGR-1502\/E model, it differs only in a larger cooler and the ability to connect a larger load of up to 1800VA. The regulator allows a smooth change of amplitude and frequency. It is mainly intended for the regulation of large bowl vibratory feeders.<\/p>\n Parameter setting is performed directly on the control panel of the unit. The control unit can work independently or can be controlled from a PLC. The control unit enables the connection of sensors and valves to digital\/analog inputs\/outputs and ensures their function according to settings.<\/p>\n The advantage of the DIGR-1502\/E KOW controller is the possibility of setting the own resonance frequency of a specific feeder, during which there is a sharp increase in the vibration intensity. In this way, excellent feeding results can be achieved even for components with a complicated shape or surface. The indisputable advantage of the regulator is the saving of electricity consumption compared to the triac regulator.<\/p>\n The regulator allows a smooth change of frequency in the range of 20-120Hz with a step of 0.2Hz.<\/p>\n The regulator has IP54 protection and can be mounted outside the switchboard.<\/p>\n The controller includes a safely separated 24V \/ 4VA DC source for powering sensors and valves, and a 10V DC source for powering the analog input.<\/p>\n The VSD01<\/a> vibration sensor can be connected to the DIGR-1502\/E controller.<\/p>\n<\/div> \u20ac 883<\/strong> Prices do not include VAT. Price of transport is by country of destination.<\/p>\n<\/div><\/div><\/div><\/div><\/div>Price:<\/h2><\/div>
\nprice from 5 pcs (5% discount): \u20ac 838,85
\nprice from 10 pcs (8% discount): \u20ac 812,36<\/p>\nCommonly used controller functions:<\/h2><\/div>
Technical parameters:<\/h2><\/div>\n